Clean-Co Systems state-of-the-art Heat Exchanger Cleaning and Repair facility is ready to tackle all of your heat exchanger needs. Located east of Houston on Interstate 10, the complex is fully equipped with an automated shell-side cleaning system hydro-blasting pressures ranging from 10,000 psi to 40,000 psi. The adjustable flow rate can climb as high as 140 gallons per minute, depending on the particular exchangers cleaning needs. Bundles are loaded onto hydraulic actuated rollers for safe positioning and handling by a 120,000-pound capacity overhead crane. The rollers allows for safe handling and thorough cleaning of the bundles. Hydro-blast technicians operate the control panel a safe distance from the hydro-blast zone while fifteen-foot high, heavy mill vinyl curtains keep the action contained in a safe and controlled environment.
The inside diameter of the heat exchanger tubes are cleaned by an automated multi-tube lancing system. Water pressure can range from 10,000 psi to 50,000 psi. With five tubes being cleaned simultaneously from a pneumatic drive mechanical system, it is five times faster than regular flex-line lancing and 100's of times safer. The operator maintains clear of all debris and spray while working the control panel at a safe distance.
Chemical cleaning and soaking is a non-invasive approach to decontaminating heat exchangers as well. Tests are conducted to determine the right chemicals to clean contaminates prior to soaking. This method is excellent for older exchangers that are not quite ready to retire but may not readily withstand 40,000 psi blasting.
According to Mickey Rooney, President of Clean-Co Systems, one of the requirements for the design of the facility was the high-tech water treatment and recycling plant. "We wanted to take industrial cleaning to the next level with a closed loop, water retirement system that would recycle the water we used in the hydro-blasting operations". The system can treat 500 gallons of contaminated water per minute and keep three 140 gallons per minute flow rate hydro-blasters from getting thirsty.
Clean-Co will service and clean many models of heat exchange equipment, including plate and frame models. They can fix, refurbish, re-tube or replace all malfunctioning or problem parts. All work follows the guidelines of the ASME quality standards. Emergency services are available and in the Houston area can be there within an hour.
Clean-Co Systems field technicians are available 24/7/365 for exchanger extraction, loading and hauling from your site and back. Specialty designed flat bed trailers with secure tie-down systems are equipped with removable canopies that will keep the road trip private and secure. "In an effort to reduce the hazards of "on-site" heat exchanger cleaning during shutdowns and outages for our clients, we expanded our Channelview, Texas location with this new facility and are proud to now offer an 'off-site' alternative," Rooney said.

CleanCo Accepts Safety Award from ExxonMobil, Baytown, Texas for Hydro Excavating and Industrial Services

Hydro excavation is the way to go if you need to dig without any risk; when backhoes can't get to your site; or when shoveling is imprecise, risky and labor consuming. We use water under pressure to open the hole – coupled with flowing air to simultaneously vacuum away the material you want removed. The technology is fast, clean and safer than conventional digging.

CleanCo Systems is trusted by the petroleum and chemical industries to safely work around gas pipelines and drilling rigs. Utilities and a host of other major industries use our service to precisely open up the earth around buried cable, underground wiring and other sensitive areas.

We come to your project with state of the art hydro excavation vacuum trucks.
Our operators have had top training in hydro excavating.
Call 1-866-922-2626 for a free estimate.

You may have heard the process called "potholing", "hydro trenching" or "soft digging". Those names are good descriptions of some of the various applications of our technology. It is controlled digging that is ideal for:

• Opening up trenches
• Locating utilities and pipelines
• Risk free digging in hazardous or sensitive areas
• Pipeline tie-ins
• Digging to place utility lines
• Drainage ditches
• Locations that are tough to get to
• Cleaning tanks and other containers
• Indoor hydro excavation
• Call us about your Hydro Excavation project. Our equipment is perfect for custom jobs.

NON-DESTRUCTIVE HYDRO EXCAVATION VACUUM TRUCK AND HYDRO EXCAVATION SERVICES FOR:

The cutting power of our hydro excavating equipment is potent enough to <ahref="/tank-cleaning/">remove thick industrial deposits such as plastic coatings on containment tanks. Because it can handle that kind hard surface, it is remarkably precise when "cutting" the earth or any surface you need to excavate. Then the slurry of dirt and water travels through an 8-inch tube, at a controlled rate, into a containment tank on one of our special trucks.

There are no sparks or fumes produced by hydro excavation. This is one reason why it is perfect for cleaning tanks, and for working around gas and other flammables. Our industry-standard vehicles include liquid vacuum trucks and a very high performance "Guzzler", whose name describes its effectiveness. The equipment is self-contained, limiting crowding at your jobsite.

The benefit to you of vacuum removal of the displaced material is that your crews do not lose time on disposal. Hydro excavation reduces backfill and simplifies restoration of the dig area. Our knife-perfect process removes only enough for you to get the job done. A backhoe simply cannot offer that accuracy, plus a Cat may not be able to get into the tight space you have to work in. And backhoe tracks mess up the work area, especially if it is muddy. Another improvement over conventional digging is that our crew remains at ground level, which eliminates the threat of jobsite injury from trench cave in or accidental contact with "live" power lines. Hydro excavating is tailor made for safely uncovering buried utilities. All of our experienced workers are schooled in avoiding the hazards of working around buried live electricity, and they put safety first.

Hydro excavation requires less labor than conventional digging methods. There is far less disruption of the surrounding area because less material is removed, and it is vacuumed directly from ground to truck so there is no blowing dirt or debris. If there are Clean Water Act issues present, the technology is the best available for adhering to the standards involving blowing and runoff.

The petroleum and chemical industries rely on us for hydro excavation.
Let us explain how it can be applied to your workplace.
Call 1-866-922-2626 now for a free estimate

We offer hydro excavation industrial services nationwide.

Industrial Facilities use Hydro Excavation Services from CleanCo Systems

CleanCo Systems Hydro Excavating Services is the way to go when you need to dig without any risk. Backhoes and heavy equipment sometimes can't get to your site or they are hazardous and labor intense. Hydro-excavation requires less labor than conventional digging methods. Hydro excavating produces no sparks or fumes and it is perfect for cleaning tanks and for working around gas and other flammables. CCS's fleet of self-contained trucks use water under pressure to open the hole -- coupled with flowing air to simultaneously vacuum away the material to be removed. Soil is vacuumed directly from the ground to the truck so there is no blowing dirt or debris. The technology is fast, clean and safer than conventional excavating. CleanCo Systems is trusted by the petro-chem and oil and gas industries to safely work within their facilities and around pipelines and drilling rigs. Utility companies and a host of other major industries also use Hydro Excavating to precisely open up the earth around buried cable, underground wiring and other sensitive areas.

Emergency Response and Hydro-Excavating
Hydro Excavating is also utilized in environmental emergency response calls for oil spills and excavating contaminated soil in a precise, almost surgical method, leaving the non-contaminated soil behind. This process reduces the waste flow and the cost of disposing of the waste. Remediation of a contaminated site is much more effective and cost efficient using Hydro-Excavating.

Municipal Storm Sewer Cleaning
Storm sewer drains are effectively cleaned using Hydro-Excavating. CleanCo Systems has worked with city, county and state agencies on drain and storm water cleaning and excavating.

You may have heard the process called "potholing", "hydro trenching" or "soft digging". Those names are good descriptions of some of the various applications of our technology. It is controlled digging that is ideal for:
Opening up trenches, Locating utilities and pipelines, Risk free digging in hazardous or sensitive areas, Pipeline tie-ins, Digging to place utility lines Drainage ditches. Locations that are tough to get to, cleaning tanks and other containers, Indoor hydro excavating .

Give us a call at 866-922-2626

Dry Ice Blasting Cleaning Services for Heat Exchangers, Boilers, Tanks, Reactors and Piping

Clean-Co System's Dry Ice Blasting (or CO2 blasting) is a fast, easy and cost-effective cleaning method that uses high-velocity dry ice (or solid CO2) pellets to clean surfaces without damaging equipment or creating new waste streams. Because of the temperature difference between the dry ice particles (-109°Fahrenheit / -78.3°Centigrade) and the surface being treated, thermal shock occurs during the dry ice blasting process. This breaks down the bond between the substrate and the contaminant to be removed from it.

The dry ice vaporizes on impact, so no secondary waste stream is created. A number of industries worldwide have discovered the advantages of this precision cleaning process. Applications range from heavy slag removal to delicate semiconductor and circuit board cleaning. Dry ice blasting lets you: * Remove adhesives, lubricants, paints and other substances from products and equipment without damaging the substrate * Clean assembled components and equipment, eliminating teardown/rebuild time * Reduce hazardous waste streams by replacing chemical solvents * Improve maintenance of sensors and computer components, tooling, hot ovens, conveyor rollers, spray booths and more... * Manage downtime by cleaning your equipment online

Dry Ice Blasting is a dry, nonabrasive, nonconductive cleaning process that leaves no residual media to clean up. It's the pure and powerful solution for your cleaning and maintenance needs.

Water Cutting Metal

Clean Co Systems patented Multi-Phased Hydro Blaster is an efficient way to deliver the cutting power of a "Plazma Cutter" but with the safety of water. These methods of heat free cutting power can be used in sensitive areas of a facility were flammable liquids and gases are in close proximity. Utilizing 40,000 psi and a special tip that combines a garnet abrasive, the system can handle cutting through high-density polymer, metal and concrete. The Multi-Phased Hydro Blaster has replaced the use of "chainsaws" in some Polymer Plants to cut out and remove hardened plastic from reactors. When entry into tanks and vessels that have had hydrocarbons and other flammables stored in them is needed, the precision metal cutting attachment turns the Multi-Phased Hydro Blaster into a safe and effective alternative to conventional flame cutting. Reducing down time and eliminating expensive procedures required for the use of flame cutting.

Clean-Co's Patented 50K "Diamond Tip" Technology for:Heat Exchangers, Boilers, Tanks, Loop Reactors and Piping and Hydro Air Excavation.

Clean-Co Systems is one of the leading industrial and specialty cleaning companies in Houston, Texas. We have some of the largest ultra-high pressure water blasting machines in the United States and a patented process that is definitely a step above the rest. Clean-Co Systems offers quality performance with a safety record of 5 years with no recordables as well as a 24-hour on call Nationwide service.

Our services and equipment consist of: Chemical Cleaning, High Pressure Hydroblasting, Paint Preparation and Removal, Vacuum Truck Services, Hydro Excavating, Metal Cutting, Cold Cutting, Soil Remediation, Multi Tube Lancing, Shell Side Machine Services, Offsite Heat Exchanger Cleaning Services, RHD Pipe Cleaning, Robotic Camera Pipe Inspections, Soil Remediation and Steam Generator Rental. * Clean-Co Systems' Operators and Technicians have an average of 5+ years experience. * Clean-Co Operators and Technicians are trained and certified to do hydroblasting, chemical cleaning and vacuum truck work. * Clean-Co Systems has the latest technology and equipment along with a patented cleaning process. * Clean-Co Systems has an excellent EMR rating with Zero Injuries. Clean-Co Systems promises a (1) one hour response time. (In the Houston area.) * All Clean-Co Supervisors OSHA 30 Hour Trained.

Tank and Vessel Cleaning

Clean-Co Systems Industrial Service Company offers a complete line of tank and vessel cleaning systems. Combined with the patented Multi-phase Hydroblaster, these systems provide a safe and efficient way to clean inside of storage tanks, pressure vessels, boilers, and silos. The use of 3-D water blast nozzles can often eliminate the need for vessel entry. The 3-D nozzle works by rotating two jets at 90 degrees to each other. By eliminating vessel entry, you eliminate the need for hole watch and stand-by rescue personnel. The 3-D system will completely clean the entire vessel. Projects that require vessel entry can also be safely cleaned with the spin jet surface cleaner. Product build-up, coatings, and linings can all be easily removed with the spin jet surface cleaner.

Industrial Paint Stripping, Removal and Surface Preparation Services

Clean Co Systems' Crawler is an automated surface preparation system that quickly strips vertical and horizontal surfaces, like tank walls and floors, or ship hulls and decks. The Crawler uses vacuum to grip the surface and recover wastewater and debris. A winch skid assembly with locking pulleys (included) acts as a fall arrest system and allows the operator to quickly position the Crawler on vertical surfaces. The system is driven and steered by pneumatically powered wheels, not by the cable system. The entire system is operated from a control console, allowing the operator the best location to view the work area. The Crawler also utilizes a rotating center hub design that allows the crawler to clean both up-and-down and side-to-side on vertical surfaces without the need to re-rig the system. The Multi-Phased Hydro Blaster can also be converted to an effective paint prep wand by changing to a rotating tip specifically for stripping paint. The system will strip away the toughest industrial coatings without the messy cleanup left behind from standard sand blasting preparation.

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Mauris aliquam metus nibh. Ut lacinia, ante vitae rutrum pellentesque, lectus mauris congue tortor, in vehicula tellus lectus id quam. Etiam facilisis, quam vitae malesuada aliquet, ante est vulputate justo, nec volutpat dolor urna a lorem. Fusce euismod tellus quis lorem facilisis dapibus. Donec ac lectus nec dolor sodales ullamcorper a volutpat dolor. Quisque facilisis convallis ipsum, sed aliquam risus egestas quis. Aenean at mattis ante. Duis neque ligula, dignissim ut malesuada a, dictum sed lorem. Sed scelerisque metus tortor. Vestibulum auctor risus a lacus scelerisque eu dignissim lacus fermentum. Etiam a odio sit amet lorem lacinia commodo vitae nec mauris. Ut congue laoreet purus, a lacinia leo gravida at. Aliquam non hendrerit lorem. Aliquam varius odio eu lectus consequat et tincidunt nunc volutpat.

Etiam suscipit, tortor eget accumsan vehicula, nisl nisl tincidunt lacus, vel euismod neque lectus at nunc. Proin sit amet mi purus. Nunc tincidunt turpis vel metus ultricies pharetra. Vivamus vel metus at lacus ultricies malesuada. Fusce convallis posuere interdum. Aliquam risus lorem, luctus a iaculis at, pretium eget enim. Nunc ullamcorper risus nibh, sit amet facilisis sapien. Nulla porttitor velit eu felis suscipit id ultricies nunc cursus. Etiam erat lacus, tristique vel auctor quis, fringilla vel sapien. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Integer tempus odio eget justo tempor a congue purus ullamcorper. Praesent venenatis est ac nisl aliquet a dapibus elit congue. In eros metus, congue at eleifend non, laoreet tincidunt lacus. Vestibulum ante ipsum primis in faucibus orci luctus et ultrices posuere cubilia Curae; Nunc non sapien turpis.

Pellentesque habitant morbi tristique senectus et netus et malesuada fames ac turpis egestas. Quisque vel congue quam. Vivamus mattis metus a nunc convallis luctus. Donec hendrerit, massa in consequat iaculis, nisl massa interdum nunc, nec commodo libero lorem ut magna. Integer eu erat quis urna placerat congue in vitae justo. Fusce congue nibh ultricies nunc eleifend placerat. Nunc nisi lectus, interdum sed tempus nec, eleifend id dolor.

Pellentesque habitant morbi tristique senectus et netus et malesuada fames ac turpis egestas. Quisque vel congue quam. Vivamus mattis metus a nunc convallis luctus. Donec hendrerit, massa in consequat iaculis, nisl massa interdum nunc, nec commodo libero lorem ut magna. Integer eu erat quis urna placerat congue in vitae justo. Fusce congue nibh ultricies nunc eleifend placerat. Nunc nisi lectus, interdum sed tempus nec, eleifend id dolor.

Use an event like this to create a board meeting. Add details here.

Agenda

1. Lorem ipsum dolor sit amet, consectetur adipiscing elit.
2. Quisque malesuada pretium hendrerit. Sed dui eros, semper a euismod non, cursus viverra mauris.
3. Ut ut malesuada lacus.
4. Donec pharetra augue eget nulla tempus at cursus purus sollicitudin.